Optical Fiber Fusion Splice Protection Box

Optical Fiber Fusion Splice Protection Box is used to protect the splice after the Optical Fiber Splice Box, suitable for a variety of skin line and pigtail welding, heat-shrinkable tube after welding and connector protection, widely used in fiber-to-home wiring and other projects Optical Fiber Splicing Protection. The Round FTTH Fiber Drop Cable Protection Box is used in FTTH Connection. We use this Fiber Drop Repair Splice Closure to make Heat Shrink Splice. It is designed for either Flat Drop Cable or Round Drop Cable. The Fiber Drop Repair Splice Closure fits for indoor or outdoor, providing good connection and protection in FTTH Constructions.

Features

Small size and good appearance

Smooth body and convenient installation

Mainly used as the protection between cables or pigtails

The reliable protection for splicing point avoids any breaking caused by external forces

Technical Data

Operation Environment

Temperature: -25℃~+65℃

Atmospheric Pressure: 70Kpa~106Kpa

Product Appearance

Without any defects that may affect the performance of the product, and the plastic shell injection smooth, no angle.

vibration: 10Hz, sinusoidal vibration;

Amplitude: 3 mm (6 mm, peak to trough);

Clamp Distance: 10 times diameter (minimum 250 mm); time: 2 hours

The residual fiber attenuation at 1550nm should be less than 0.03dB;

Torsion

Torque: The maximum torque of 25 nm or the maximum torsion angle of 90 degrees;

Torque position: 100 mm distance optical cable terminal;

Cycles: 5 cycles each protection box.

The residual fiber attenuation at 1550nm should be less than 0.03dB.

Torsion

Test method: GB/T 7424 2 E7;

Torsion length: 1m;

Reversed: 20 times;

Torsion angle: + 180 degrees;

Tension load: 20N;

Acceptance requirements: sheath should be visually free of any damage and cracking can be seen; after the test, the residual fiber attenuation at 1550nm should be less than 0.03dB.

FAQ

1.When can I get the price?
We usually quote within 48 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
3.How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 2-4 days. The samples will be sent to you via express and arrive in 4-8 days. You can use your own express account or prepay us if you do not have an account.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, production lead time is within 2~4 weeks.
5.What is your terms of delivery?
We accept EXW, FOB, CIF, DDU, DDP etc. You can choose the one which is the most convenient or cost effective for you.
6.Terms of payment?
We accept payment as the following.
1).30% T/T deposit, 70% balance before delivery.
2).100% TT in advance.
3).western union

Contact us if you need more details on Optical Fiber Splice Box. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Optical Fiber Splicing Protection、FTTH Fiber Drop Cable Protection Box. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : FTTH Components > Other Ftth Components